Check Out Our Current Promotions & Special Offers
Michigan Two-Way Radio Accessories
25009298001 Micro-USB rapid-rate plug-in charger
Micro-USB rapid-rate plug-in charger.
3087791G01 Spare power cord for CP-series multi-unit charger
These 5.5-inch VHF, flexible whip antennas have a one-piece finish, steel core and spiral wound conductor for optimal radiation characteristics.
3202607Y01 Gasket, Cover, Accessory Connector
Gasket, Cover, Accessory Connector
6680388A26 Mobile Crimping Tool
Mobile crimping tool
ENLN4104 UHF Antenna Adapter
Vehicular adapters detect the chemistry of a portable battery and select the optimum charging method while providing power for in-vehicle radio use. The antenna adapter…
EPNN9288A Rapid-Rate Charger Transformer (US), 120V
This is a 120 volt rapid-rate charger transformer (US) that plugs into the RLN6506 Amplifier Charger Kit.
HLN9457 Accessory Connector Facility Kit
Accessory connector facility kit
IMPRES(TM) 2 Multi Unit Desktop Charger, North America plug, 100-240VAC
Intelligent Motorola Portable Radio Energy System generation 2, IMPRES(TM) 2, is a battery – device – charger system solution delivering Mission Critical dependable…
IMPRESâ„¢ 2 Multi-Unit Charger
Your radio is your lifeline. If your battery dies, it jeopardizes everything. Customize your charging to maximize the power and extend the life of batteries in storage….
NLN7967 Wall Mount For IMPRES Multi-Unit Chargers
These brackets enable you to mount your multi-unit charger on the wall
NNTN7073 IMPRES Multi Unit Charger with Displays
This 6-unit, rapid-rate charger displays critical battery information including: current charge status, battery mAh, voltage, battery kit number, serial number, and…
NNTN7392 IMPRES Battery Data Reader
The industry exclusive IMPRES Battery Reader provides IMPRES battery users the ability to access charging, reconditioning and key usage data that can affect overall…
NNTN7586 IMPRES Dual Unit Charger
This new charger provides public safety personnel the convenience of a spare battery that is charged and ready to be used at all times. The unique dual pocket design…
NNTN7593 IMPRES Dual Unit Charger with Display (APX)
This new charger provides public safety personnel the convenience of a spare battery that is charged and ready to be used at all times. The unique dual pocket design…
NNTN7616 IMPRES Vehicular Charger
Rapid-rate, single-unit charging system that allows users to charge batteries on the go in their vehicles. This IMPRES-compatible vehicular charger has full IMPRES…
NNTN7624 IMPRES Vehicular Charger
Rapid-rate, single-unit charging system that allows users to charge batteries on the go in their vehicle. This IMPRES-compatible vehicular charger has full IMPRES…
NNTN7677 IMPRES Fleet Management Charger Interface Unit
The Charger Interface Unit (CIU) attaches to an IMPRES multi-unit charger to enable the data transfer to IMPRES Fleet Management. This CIU is required for all IMPRES…
NNTN7686 Insert For Multi-Unit Charger Adapter
Insert for multi-unit charger adapters (6 pk) for APX battery. Designed to fit the WPLN4108, WPLN4181, WPLN4130 six unit charger
NNTN7687 Plastic Insert For Single Unit Charger Adapter
Plastic insert for single unit charger adapter for APX8000, 7000, 6000 battery to fit a WPLN4111/4
NNTN8045 IMPRES Fleet Management Charger Interface Unit
Intelligent Motorola Portable Radio Energy System, IMPRES(TM), is a battery – device – charger system solution delivering Mission Critical dependable performance. An…
NNTN8169 APX Battery Insert For XTS Single-Unit Charger
This adapter allows users to charge select APX 4000 batteries in the existing XTS multi-unit charger (WPLN4111) .
This charger insert is only compatible with…
NNTN8170 APX Battery Insert For XTS Multi-Unit Charger
This adapter allows users to charge select APX batteries in the existing XTS multi-unit charger WPLN4108 or WPLN4130 .
This charger insert is only…
NNTN8275 Single-Unit Charger
This rapid charger kit charges your RDX Series radios in two hours. Includes US power supply.
NNTN8460 Charging Inserts
Set of 6 inserts that are compatible with the PMLN6588 and PMLN6597 multi-unit chargers. These inserts are compatible with CP200d, CP200.XLS, CP200, CP150 and PR400.
NNTN8525 Travel Charger
Conveniently charge your radio while in the vehicle. Unit includes a voltage-regulated vehicular charger adapter, custom charger base, mounting bracket and coil cord…
NNTN8527 APX Vehicular Adapter
When installed in a vehicle, the APX Vehicular Adapter (VA) utilizes the mobile antenna providing enhanced transmit and receive range. Powered by the vehicle’s…
NNTN8844 IMPRES 2 Multi-unit Charger
Your radio is your lifeline. If your battery dies, it jeopardizes everything. That’s why there’s IMPRES 2, a next-generation energy system that’s…
NNTN8860 IMPRES 2 Single-unit Charger
NNTN8863 IMPRESâ„¢ 2 Single-unit Charger, 100-240 vac
Intelligent Motorola Portable Radio Energy System generation 2, IMPRES(TM) 2, is a battery – device – charger system solution delivering Mission Critical dependable…
NNTN8921 IMPRES 2 Li-Ion 4500mAh Battery, TIA 4950, Rugged IP68
This IMPRES 2 4500mAh, TIA 4950 Li-Ion battery is IP68 rated, which means it can be fully submerged in two meters of water for up to four hours. Because it is designed…
PMKN4147 Mobile Front Programming Cable
Mobile Front Programming Cable
PMKN4151 Mobile Rear Accessory Connector Universal Cable
Mobile Rear Accessory Connector Universal Cable
PMLN5620 Connector Extender, 20 pieces
Connector Extender, 20 pieces
PMLN5916 Six-Pocket Multi-Unit Charger
Sleek and functional design enables you to charge up to six SL Series radios or batteries simultaneously.
PMLN6588 Universal Multi-Unit Charger
This multi-unit charger has a compact design for a smarter, more productive workspace. The interchangeable charging pockets make it a versatile and cost effective…
PMLN6687 Multi-Unit Charger
Sleek and functional design enables you to charge up to six SL Series radios or batteries simultaneously.
PMLN6701 Tri-Unit Charger
This tri-unit charger enables you to conviently charge your SL series radio, a spare battery, and your Operations Critical Wireless accessories all at the same time….
PMLN6716 Wireless RSM Vehicular Charger
This Wireless Remote Speaker Microphone (RSM) vehicular charger allows you to charge the battery for the Wireless RSM by itself or the Wireless RSM with the battery…
PMLN7089 Travel Charger
This compact travel charger allows the radio to be used while charging in the charger base. Unit includes voltage regulated vehicular charger adapter, custom charger…
PMLN7101 Multi-Unit Charger
Multi-unit charger for the SL300.
PMLN7109 Single-Unit Rapid Rate Charger
Single-Unit Rapid Rate Charger 5V/1A, 5W, 100V-240V (US Plug)
PMLN7120 Wireless Remote Speaker Microphone Dual-Unit Charger
Wireless Remote Speaker Microphone (RSM) dual unit charger (DUC) with NA power supply. With this dual unit charger you can charge two batteries by themselves or…
PMPN4084 Multi-Unit Charger
This multi-unit charger allows you to charge up to six devices simultaneously. Devices not included.
PMPN4465 – 6-Pocket Multi Unit Charger (MUC)
Charge up to 6 radios simultaneously. Charge the radio or the battery by itself.
PMPN4469A – Single Unit Charger
With its small footprint, the single unit charger is ideal for personal use. Charge the battery by itself or while inside the radio.
RLN5382 Display Module For IMPRES Multi-Unit Charger
Individual IMPRES display module that is used with IMPRES multi-unit chargers that do not have a display. This display shows critical battery information including:…
RLN6433 Travel Charger
This compact travel charger allows the radio to be used while rapid charging in the charger base. Unit includes a voltage regulated vehicular charger adapter, custom…
RLN6434 APX Travel Charger
Vehicle charger for battery only or APX radio with battery attached. Includes mounting bracket, means to keep battery or radio/battery secure, 12v vehicle adapter plug….
SL7550 Micro-USB Single-Unit Plug-In Charger
Standard micro-USB rapid-rate plug-in charger for SL series radios.
WPLN4232 IMPRES Single Unit Charger
Innovative charging and reconditioning system that streamlines and automates battery maintenance. Talk time and life cycle are optimized as the need for manual…